Get Adobe Flash player

     Need to Change the Time and/or Date on your telephone system?    

 

 

 

 


Amanda@SOHO Voice Mail System

Changing the time on a Amanda@SOHO system can be done from any extension but you must log in as the administrator.

  1. Dial the voice mail pilot extension number (the same number normally used to check voice mail)
  2. When the voice mail system answers press "STAR"
  3. Enter "999#" then enter the administration password (default = 999) and press "#"
  4. Enter "883"
  5. Enter the date (MMDDYY) then press "#"
  6. Enter the time (HHMM) then press "#"
  7. The system will prompt for AM or PM
  8. Exit
Top of Page

AT&T 974 and 984
  1. Press the "Enter" navigation button to begin feature setup.
  2. Press the down arrow until the screen display includes TIME/DATE.
  3. Press "Enter". The screen display includes HOUR and the current hour setting.
  4. Press the right or left arrows until the correct hour displays.
  5. Press the down arrow to save the hour setting. The screen display shows "MINUTE" and the current minute setting.
  6. Press the right or left arrows until the correct minute is shown.
  7. Press the down arrow to save the minute setting. The screen display includes AM/PM and the current setting.
  8. Press the right or left arrow to toggle between AM and PM.
  9. Press the Down arrow to save the AM/PM setting. The screen display includes MONTH and the number of the current month setting.
  10. Press the right or left arrow until the number of the correct month is shown.
  11. Press the down arrow to save the month setting. The screen now displays DATE and the current day of the month setting.
  12. Press right or left arrows until the correct day of the month is shown.
  13. Press the down arrow to save the day of the month setting. The screen now displays DAY OF WEEK and the current setting.
  14. Press the right or left arrows until the correct day of the week is shown.
  15. Press the down arrow to save all settings. The screen now displays MAIN MENU.
  16. Press and hold the "Enter" key to return to the idle screen.
Top of Page

Avaya/Lucent Partner Telephone System

Must be done from extension 10 or 11.
  1. Press Feature and dial 00.
  2. Press the left intercom button twice.
  3. To set the time, press # and dial 103. Enter the correct time using a 24-hour format.
  4. To set the date, press # and dial 101. Enter the correct date using MMDDYY format.
  5. Press feature and dial 00 to save.
Top of Page

Avaya Merlin Magix Phone System

Changing the time on a Avaya Merlin Magix system is accomplished from the system programming console. The date is change separately from the time.

Changing the date:
  1. Press Menu
  2. Press System Program
  3. Press Exit or Start
  4. Press System
  5. Press Date
  6. Enter the date as mmddyy where mm = month, dd = day, yy = year
  7. Press Enter
  8. Press Exit or Back
  9. Press Home or Exit
Changing the time:
  1. Press Menu
  2. Press System Program
  3. Press Exit or Start
  4. Press System
  5. Press Time
  6. Enter the date as hhmm where hh = hours & mm = minutes
  7. Press Enter
  8. Press Exit or Back
  9. Press Home or Exit
Top of Page

Avaya/Lucent Partner Telephone System

Changing the time on a Partner system must be done from extension # 10.

  1. At station/ext. # 10, press feature, 0, 0
  2. Press the left intercom 2 times
  3. Enter # 103
  4. Enter the correct time in 24 hr. format, for example:
    • to set the time for 09:00 A.M., enter 0900
    • to set the time for 04:45 P.M., enter 1645
  5. Press feature, 0, 0
Top of Page

Commander Vision

To Change the Date and Time:
    
    1.  When entering into programming mode do not lift the receiver
    2.  From the Programming Station press the [P] Programming Key  
    3.  Until System Programming is displayed6Press the Scroll Down Key
    4.  Select System Programming (using grey menu key next to display)
    5.  Enter the System Programming Password – 1111
    6.  Select System (using grey menu key next to display)
    7.  Select Time and Date (using grey menu key next to display)
    8.  Enter the correct time in 24-hour format, (e.g. 1:30pm as 1330).  The display will prompt for date to be entered
    9.  Enter in the correct date in DDMMYY format, (e.g. 1 January 2001, 010101)
  10.  The display will now revert back to programming menu
  11.  Press [HANDSFREE] key to finish programming
 

 

 

Top of Page 

Comdial Digitech

Changing time and date from attendant station:
  1. Press the "ITCM" key.
  2. Dial *#01.
  3. Enter the date in YYMMDD format.
  4. Enter 2 digits (00-23) for hour and 2 digits for minutes.
  5. Press SPKR to end.
Top of Page

Comdial DSU/DSU II
  • From extension 10, press "*#746*"
  • Option One
    • Dial "01"
    • dial 00-99 for year
    • Dial 10-12 for month
    • Dial 1-31 for day
    • Dial 00-23 for hour
    • Dial 00-59 for minute.
  • Option Two
    • Dial 00-23 for hour
    • Dial 00-59 for minute
    • Dial "#" to assign hours and minutes.
  • Press speaker to exit.
Top of Page

Comdial DX-80 System

Changing the time on a Comdial DX-80 system can be done from any display phone.

  1. Press Feature # * and enter in your password (Default password ########)
  2. Press Show and enter 0803
  3. Press Save then Show
  4. The option to change the Year will appear - if you do not need to change the year, press Next - if you need to change this value, press Chg, enter in two digits for the year and press Save then Next
  5. The option to change the Month will appear - if you do not need to change the month, press Next - if you need to change this value, press Chg, enter in two digits for the month and press Save then Next
  6. The option to change the Day will appear - if you do not need to change the date, press Next - if you need to change this value, press Chg, enter in two digits for the date and press Save then Next
  7. The option to change the Weekday will appear - if you do not need to change the weekday, press Next - if you need to change this value, press Chg, to select the weekday, and press Next
  8. The option to change the Hour will appear - press Chg and enter in two digits for the hour in military format - press Save then Next
  9. The option to change the Minutes will appear - press Chg and enter in two digits for the minutes and press Save
  10. Press the Hold button to exit programming mode
Top of Page

Comdial Executech
  1. Press ITCM *#.
  2. Dial 01.
  3. Dial two digits (00-99) for year.
  4. Dial two digits (01-12) for month.
  5. Dial two digits (01-31) for day.
  6. Dial two digits (00-23) for hour.
  7. Dial two digits (00-59) for minute.
  8. Dial one digit (1-7) for day of week. SUN = 1, SAT = 7
  9. Press * for next feature or press MNTR (SPKR) to end.
Top of Page

Comdial Impact

Comdial Impact - From Attendant Station

  1. Without picking up the handset, press "Intercom" and dial "*#01". The display should show "Set Clock".
  2. Set the year by dialing 00-99.
  3. Set the month by dialing 01-12.
  4. Set the day by dialing two digits 01-31.
  5. Set the hour by dialing 01-23.
  6. Set the minutes by dialing 00-59.
  7. Pick up and replace the handset to complete.
Top of Page

Comdial DXP
  • Press "Intercom *#0*".
  • Select "01".
  • Enter date (MM:DD:YY).
  • Enter time (HH:MM).
  • Press "#" to end.
Top of Page

ESNA Telephony Office Linx

Date
  • Go to main menu on ESNA (Telephony Office-Linx window).
  • Choose "System" on the tool bar, then "Commands".
  • Enter current date MM:DD:YYYY.
  • Press "Execute".
  • Choose "Exit".
  • Minimize screen.
Time
  • Go to main menu as above.
  • Choose "System" on the tool bar, then "Commands".
  • Enter current time hh:mm (1:45pm would be entered 13:45).
  • Press "Execute"
  • Choose "Exit"
  • Minimize screen.
Top of Page

Ericsson BP150 

  • PROG
  • F1 Enter Password
  • ENTER Command 6101=date, 6103=time, 6104=12/24 hour
  • ENTER Set Year Month
  • Key in new date (24 July 1967 = 670724)
  • ENTER Day of Week (1=Sunday, 2=Monday, 3=Tuesday, 4=Wednesday, 5=Thursday, 6=Friday, 7=Saturday)
  • ENTER Set Hour Minute Second
  • ENTER Shows current time with flashing cursor
  • Key in correct time in 24 hour format (1:30pm = 153000)
  • ENTER 12 H mode, Display
  • Y OR N (from letters above numeric keypad for Y press 9 key 3 times) (from letters above numeric keypad for N press 6 key 2 times)
  • ENTER
  • C key to end programming setting
Top of Page

Ericsson Temo
  • [SPK]  # * # *  Password
  • 00 à Enter Command Ø 0003 [HOLD]
  • Year:_ _ [HOLD] Month:_ _ [HOLD]
  • Day:_ _ [HOLD] *Week:_ _ [HOLD] 
    *Week: 0 - Sunday, 1 - Monday, 2 - Tuesday, 3 - Wednesday, 4 - Thursday, 5 - Friday, 6 - Saturday
  • Hour:_ _ (24hr) [HOLD] Minute:_ _ [HOLD]
  • Second:_ _ [HOLD] Set:_ (1 Yes, 2 No)
  • Press DC to get out of the programming

 

Esi

(Installer or Administrator password access required) 

The following is derived from the explanation of Function 14 in your ESI phone system's Installation Manual or Administrator's Manual (as the case may be).  Current ESI phone systems can be configured to reset the time automatically when Daylight Saving Time (DST) ends or begins each year. However, if your system is not configured that way (or it's an older ESI phone system that doesn't perform the automatic time change), the following instructions explain how to reset the time and date manually.
Note:  To configure a compatible ESI system to change time automatically when Daylight Saving Time ends or begins, see "Automatic adjustment for Daylight Saving Time," below.

  • On any ESI phone within the system, press PROG/HELP.  Note: If using an ESI Feature Phone that has separate PROGRAM and HELP keys, press PROGRAM.
  • The normal station programming menu prompt will begin to play.
  • Stop the prompt by pressing HOLD (or, on an older ESI phone, PARK).
  • Enter the Administrator password and then press #.  Note: If this doesn't admit you to Administrator-level programming (the phone display should show ADMINISTRATOR), contact your ESI Reseller for assistance.
  • Access Function 14 by pressing 1 4.  (If the system prompts you to press 1 to set time and date, do so.)
  • Enter a new time using a twelve-hour format and then press #.  Example: Enter 1 2 3 3 # for 12:33 or 3 1 5 # for 3:15 (note that you need no leading zero for the time).
  • Select AM or PM by pressing a scroll key and then #.
  • When the date appears, either:
    Press # to accept the currently displayed date as correct;
    or
    Enter a new date in an eight-digit format, including leading zeroes, and then press # and hang up to finish the entry.
    Example:
    For October 18, 2007, enter 1 0 1 8 2 0 0 7 # (and, to repeat, leading zeroes are required here, unlike in Step 5).

Automatic adjustment for Daylight Saving Time

Notes:
This doesn't work on ESI phone systems manufactured before February, 2003 - specifically, IP 200, IP 40, IVX 128 Plus, IVX 128, IVX 20 Plus, IVX 20, and [original] IVX. If you don't know which phone system you have, consult your ESI Reseller.
This feature, when enabled, causes the phone system's real-time clock to adjust itself automatically for Daylight Saving Time. The options are AUTO [enabled] and DISABLE (the latter is best for counties or states that don't observe DST).
To set this feature:

  • On any ESI phone within the system, press PROG/HELP  Note: If using an ESI Feature Phone that has separate PROGRAM and HELP keys, press PROGRAM.
  • The normal station programming menu prompt will begin to play
  • Stop the prompt by pressing HOLD (or, on an older ESI phone, PARK).
  • Enter the Administrator password and then press #.  Note: If this doesn't admit you to Administrator-level programming (the phone display should show ADMINISTRATOR), contact your ESI Reseller for assistance.
  • Access Function 142 by pressing 1 4 2 and then #.
  • The phone display will show AUTO TIME SET, and either ENABLED or DISABLED. If necessary, use the phone's scroll keys to toggle between the two settings. We recommend the ENABLED setting. When the display shows the setting you want, press #.
  • The phone display will now show DAYLIGHT SAVING, and either AUTO or DISABLED. If necessary, use the phone's scroll keys to toggle between the two settings. If you want your phone system to adjust its clock setting automatically whenever your time changes between Daylight Saving Time and Standard Time (either direction), select AUTO. If you live in an area which doesn't observe Daylight Saving Time, select DISABLED. When the display shows the setting you want, press # # and hang up.

Top of Page

Executone CX816 

 

 

  • From station 100, take the handset off-hook.
  • Dial "*".
  • Dial "7764" (PROG).
  • Press the "FLASH" button.
  • Dial "28".
  • Enter time and date as follows: YYMMDDHHMMSS.
  • Press the "HOLD" button.

Enter time and date in the following formats-
Year (YY) =00-99
Month (MM) =01-12
Day (DD) =0-31
Hour (HH) =00-24
Minute (MM) =00-60
Second (SS) =00-60

Top of Page

Executone Infostar VX II Voice Mail
  • Press "SPKR" or lift handset. Press "436" to enter voice mail.
  • Press the "#" key, mailbox "5000", press password "5000" (default on most systems, yours may differ) then the "#" key.
  • Press "5" to change time and date.
  • After the current date plays, enter the current date MM:DD:YY.
  • After the time plays, enter the new time HH:MM:SS in military format.
  • When finished, press the "*" key until you hear "exiting the system".
Top of Page

Executone Isoetec IDS via Operator's Phone M-32 Series

Time

System must have the TIME option enabled. Time may be changed only from a designated Operator Phone.

  • Lift the Handset.
  • At the dial tone, dial "28" then the 4-digit time in military format. For example, "1500" = 3:00PM.
  • A confirmation tone is heard.
Top of Page

Executone Isoetec IDS via Operator's Terminal


The TIME option must be enabled on the system.
  • While the terminal is idle, press and hold Ctrl and "C". Release both keys. The cursor moves to the Hour field.
  • Enter the 2-digit hour in 24-hour clock format (ie., 16 for 4pm). The cursor moves to the Minutes field.
  • Enter the 2-digit minutes. The cursor moves back to the Hour field.
  • Press the Return key. The cursor moves to the Month field.
  • Enter the 2-digit month, day and year. The system inserts the "-" automatically.
  • Press and hold Ctrl and "C". Release.
Top of Page

Executone Isoetec Medley

Time
  • Press the "Menu" key.
  • Press "Park 3".
  • Enter the password (default is "456")
  • Press "#".
  • Press "1" for System Functions.
  • Press "4" for System Clock.
  • Enter the time in 12-hour format.
  • Press "#"
  • Press AM or PM by pressing "Park 3" in the LCD screen.
  • Press "#" to confirm.
  • Hang up or press "HF".
Date
  • Menu (F1)
  • Park 3 Key
  • Enter the Installer Password. 789 at Default.
  • Press # to confirm
  • Dial 9819
  • Enter the Month
  • Press # to confirm
  • Enter the Day
  • Press # to confirm
  • Enter the Year
  • Press # to confirm
Top of Page

Fujitsu Attendant Console

 

Time Change for Daylight saving

 

 

 

  • Place console in Position Busy
  • Press #803 (CMC will appear on display)
  • Key in 700
  • Press "SEL" key (P1-p4 will appear on display)
  • Press "DSP" (The year, month & day, week & time will appear)
  • Month: 01 to 12, Day: 01 to 31, Week: 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 = Thursday, 6 = Friday, 7 = Saturday
    Time: 00 to 23 Hour, 00 to 59 minute, P1 = Year (4 digit), P2 = Month & Day (4 digit), P3 = Day of Week (1 digit), P4 = Hour & Minute (4 digit)
  • Press "DS4" (Cursor will now be under the time)
  • Change time by keying in new time (24hr)
  • Press "ADD CHG"
  • Press "RLS"
  • Press "TRM" then take off Position Busy

Top of Page

Fujitsu FDT 3 or 4

 

Time Change for Daylight saving

 

 

  • Press #803 (CMC will appear on display)
  • Key in 700
  • Press "SEL" key (P1 & P4 will appear on display)
  • Press "DSP" (P1 Year and P4 Time will appear)
  • Month: 01 to 12, Day: 01 to 31, Week: 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 = Thursday, 6 = Friday, 7 = Saturday
    Time: 00 to 23 Hour, 00 to 59 Minute
  • Press "SEL" (3 times) until cursor is under time on P4
  • Change time by keying in new time (24hr)
  • Press "ADD CHG"
  • Press "RLS"
  • Press "TRM"

Top of Page

Inter-Tel Axxent

From the attendant telephone
  • While the phone is idle, enter "9800". Display shows "DATE:"
  • Enter Date MM:DD:YY. Press "#" to skip date entry.
  • The display will show "TIME". Enter the time in 12-hour format.
  • The display will then show: "Press 1 for AM, press 2 for PM". Select one.
  • Press "#" to exit.
Top of Page

Inter-Tel Axxess Networked Systems

Networked Systems Only - From the attendant telephone
  • While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.
  • If you do not need to change the date, press "#" or ACCEPT to skip to the time prompt.
  • Use the dialpads to enter month day and year mm-dd-yy format.
  • If you make a mistake, press "MUTE" to backspace or "*" to start over.
  • Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.
  • If 12-hour display is used, the display shows AM or PM. Press "1" for AM and "2" for PM.
Top of Page

Inter-Tel Axxess Non-Networked Systems

Non-Networked Systems - From the attendant telephone
  • While on-hook, enter "9800" for Set Date/Time feature. The current date will display.
  • Press "#" to skip. To change, use keypad to enter the month, day and year (010305=January 3, 2005). The new date will display.
  • Use keypad keys to enter the time in hours and minutes (0900=9:00).
  • If the system is set for 12-hour format, the display will show select AM OR PM (AM=1 PM=2). Select 1 or 2.
  • The display reads, "SYSTEM DATE AND TIME UPDATED".
Top of Page

Inter-Tel GLX-PLUS

Time

 

  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4)
  • Enter the Program Time feature code (1). Display will show TIME XX:XX
  • Enter the 2-digit number for hour (00-24) and 2-digit for minutes (00-59).
  • Lift and replace the handset.
Date
  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (2). Display will show DATE DAY MON XX
  • Press "*" until the correct day is displayed. Press "#". Repeat for month and date.
  • Lift and replace the handset.
Year
  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (3). Display will show YEAR:XXXX.
  • Enter 4 digits for the year (0000-9999).
  • Lift and replace the handset.
Top of Page

Inter-Tel IMX 1224/2460
  • While on-hook, press the "SPCL" key and enter the set time of day feature code (021). Display will show "SET TIME OF DAY".
  • Use the keypad to enter the time in hours and minutes. Then press "*" for AM or "#" for PM. Display will show "SET DATE MM:DD:YYYY".
  • Use the keypad to enter the month, day and year. Backspace to correct mistakes by using the "MUTE" key. Display will show "SET DAY OF WEEK SUN".
  • Select the day of the week by scrolling through the selections. Press "#" to go forward and "*" to go back. When the desired day is displayed, press the "SPKR" key to end.
Top of Page

Inter-Tel Encore CX
  1. From the programming extension, press the PROGRAM key.
  2. Press the Scroll Down key until "System Programming" is displayed.
  3. Select "System Programming".
  4. Enter the System Programming password and select "System".
  5. Select "Time and Date".
  6. Enter the time in 24-hour format (ie. 11:50pm=2350).
  7. To change the time only, select "Confirm".
  8. To enter the date, enter in mmddyy format.
  9. Press the speakerphone key to finish programming.
Top of Page

Iwatsu ADIX Telephone System

Changing the time on an Iwatsu ADIX system can be done from the operator DSS console or from the attendant console.

From the Operator DSS when idle:
  1. Press "ICM" + "FEAT" + "6" + "4"
  2. Enter the time "HH MM" using the 24 hour military clock
  3. Press "SPKR"
From the Attendant Console when idle:
  1. Press "ETC" + "ETC" + "ETC" + "F1"
  2. Enter the time "HH MM" using the 24 hour military clock
  3. Press "RLS"
Top of Page

Key Systems Atlas 32 / 64 / 128

Changing the time on a Atlas 32, 64 or 128 system can be done from any display phone.

  1. Enter programming mode by pressing "PROG - PROG - 1 - 2 - 3 - HOLD"
  2. Enter mode 09
  3. Enter date "YYMMDD"
  4. Enter time "HHMM" (in 24 Hour format)
  5. Enter day of week 0 - 6 (4 for Thursday)
  6. Press "HOLD" at any stage to save a change
Top of Page

Mitel SX-200 EL/M

To program the system to automatically make Daylight Savings Time Adjustments

From the Console:

  • Press FUNCTION
  • Press [ATT FUNCTION]
  • Press [SET TIME]
  • Press [PM] if you wish to register the time as after 12:00 PM, in 12 hour format.
  • Press [SET] to enter the time.
  • Press [EXIT] when done.
Top of Page

Mitel SX-2000 LIGHT

To program the system to automatically make Daylight Savings Time Adjustments

From the Console: 
  • Press FUNCTION
  • Press [FUNCTION]
  • Press [DATE/TIME]
  • Press [SET TIME]
  • Press [PM] if you wish to register the time as after 12:00 PM, in 12 hour format.
  • Press [SET] to enter the time.
  • Press [EXIT] when done.

Top of Page

 

NEC Electra Telephone System

Changing the time on a Electra Elite & Professional system must be done from the "main" or primary phone. It is usually extension # 100.

  1. Press "FEATURE"
  2. Dial "9#"
  3. Enter hour and minute
  4. Press "RECALL" to change AM/PM setting
  5. Press "HOLD" to change the calendar setting
  6. Press "RECALL" to change the day of week
  7. Dial "#" to move the cursor to day of month field
  8. Enter day of month
  9. Press "RECALL" to select month
  10. Dial "#"to move the cursor to year field
  11. Enter last 2 digits of year
  12. Press "FEATURE"
Top of Page

Norstar Merdian

Press Feature.

Enter "**8463".

Enter the password (default is 266344). The display shows
Hour: 01
Next               Change

Select CHANGE. Display shows:
Hour: __
Cancel

Enter two digits for the hour. Chose AM or PM when Prompted.

Select NEXT.
The display shows:
Minutes: 00
Next              Change

Enter the minutes.

Press the RLS button to end, or press NEXT to change the date.
The diplay shows:
Year: 99
Next              Change

Enter the two-digit year.

Select NEXT and repeat to change the month and day.

Press the RLS key to save the time and date and exit programming.

Top of Page

Norstar Meridian CICS

Time
  • Press "FEAT".
  • Press "*".
  • Press "*".
  • Press "266344" (CONFIG) or "23646" (ADMIN).
  • Enter password "23456" (ADMIN) or "72787" (SCPLUS).
  • You will see "Terminals & Sets".
  • Press "Next" five times.
  • Press "Show"
  • When you see "Hour", press "Change" or "Next" to skip.
  • Type in the hour using military time as a 2 digit number.
  • Press "Next".
  • When you see "Minutes", press "Change" or "Next" to skip.
  • Type in the minutes using a 2 digit number.
  • Press "Next".
Date:
  • When you see "Year", press "Change" or "Next" to skip.
  • Type the year in 2-digit format.
  • Press "Next".
  • When you see "Month", press "Change" or "Next" to skip.
  • Type the month in 2-digit format.
  • Press "Next".
  • When you see "Day", press "Change" or "Next" to skip.
  • Type the day in 7-digit format.
  • Press "Next".
  • When you see "End of List", Press "Rls" to exit.
Top of Page

Nortel Norstar Telephone Systems

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

  1. To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
  2. Enter password (default = 266344) - display should read "Terminals & Sets"
  3. Press "NEXT" 5 times - display should read "Time and Date"
  4. Press "SHOW" - display should read "Hour:___"
  5. Press softkey "CHANGE"
  6. Enter hour - display should read "AM OK or Change"
  7. Select AM or PM
  8. Press "NEXT" - display should read "Minutes:___"
  9. Press softkey "CHANGE"
  10. Enter minutes
  11. Press "NEXT" - display should read "Year:___"
  12. Press softkey "CHANGE"
  13. Enter year
  14. Press "NEXT" - display should read "Month:___"
  15. Press softkey "CHANGE"
  16. Enter month
  17. Press "NEXT" - display should read "Day:___"
  18. Press softkey "CHANGE"
  19. Enter day
  20. Press "NEXT"
Top of Page

Panasonic Digital Telephone System

Changing the time on a Panasonic digital system can be done from any display phone.

  1. Enter programming mode by pressing "PAUSE" then "STAR" button twice, followed by 1, 2, 3, 4
  2. Enter program # "000"
  3. Press "SPEAKER" button
  4. Press "FORWARD/DND" button to change to the hour selection
  5. Press "TRANSFER" button and enter the hour
  6. Press "FORWARD/DND" button to change to the minutes parameter
  7. Press "TRANSFER" button and enter the minutes
  8. Press "FORWARD/DND" button to change to the AM/PM parameter
  9. Press "MUTE" button to select AM or PM
  10. Press "STORE" button
  11. Press "HOLD" button
  12. Lift and replace handset
Top of Page

Panasonic KX-TA624 Telephone System

Changing the time on a Panasonic KX-TA624 system must be done from extension # 101 using a display phone.

  1. Press the "PROGRAM" button on the face of the phone
  2. Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234)
  3. Enter program # 000
  4. Press "SPEAKER" button
  5. Press "FORWARD/DND" button to change to the hour selection
  6. Press "TRANSFER" button and enter the hour
  7. Press "FORWARD/DND" button to change to the minutes parameter
  8. Press "TRANSFER" button and enter the minutes
  9. Press "FORWARD/DND" button to change to the AM/PM parameter
  10. Press "MUTE" button to select AM or PM
  11. Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed)
  12. Press "HOLD" button
  13. Press the "PROGRAM" button on the face of the phone
Top of Page

Panasonic KX-TDA50 Voice Mail System


Date & Time [000]

Date & Time/Daylight Saving—Date & Time [2-1-1]

    The date and time of the PBX can be programmed. The date and time will be shown on the display of the extensions (e.g., PT, PS).

     

    Date & Time—Year, Month, Date, Week, Hour, Second
    Indicates the current time and date. If needed, each parameter can be specified as desired (the day of the week is changed automatically to reflect the assigned date).

     

    Default Current date and time
    Value Range Year: 2000–2099
    Month: 1–12
    Date: 1–31
    Week: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday
    Hour: 00–23
    Minute: 00–59
    Second: 00–59

     

    Feature Guide References

    • None

 

Date & Time / Daylight Saving—Daylight Saving [2-1-2]
Daylight Saving Time sets the clock one hour forward at 2:00 AM on the start date, and one hour back at 2:00 AM on the end date. The start and end dates of a maximum of 20 different Daylight Saving Times can be programmed.

 

    Setting
      Enables Daylight Saving Time.
      Default Enable
      Value Range Enable, Disable

       

      Feature Guide References

        Feature References
      • 2.3.4 Automatic Time Adjustment
        Programming References
      • None

     

    Start Date—Year, Month, Day

      Specifies the Daylight Saving Time start date.

    Default Year: 2003 (For Daylight Saving Time number 1. The year advances by one for the subsequent Daylight Saving Times.)
    Month: 4
    Day: Day of the first Sunday of the month
    Value Range Year: 2000–2099
    Month: 1–12
    Day: 1–31

     

    Feature Guide References

      Feature References
      • 2.3.4 Automatic Time Adjustment
      Programming References
      • None

 

End Date—Year, Month, Day

    Specifies the Daylight Saving Time end date.

    Default Year: 2003 (For Daylight Saving Time number 1. The year advances by one for the subsequent Daylight Saving Times.)
    Month: 10
    Day: Day of the last Sunday of the month
    Value Range Year: 2000–2099
    Month: 1–12
    Day: 1–31

    Feature Guide References
      Feature References
      • 2.3.4 Automatic Time Adjustment
      Programming References
      • None

     

     

Top of Page

Panasonic KX-TVS Voice Mail System

Changing the time on a Panasonic KX-TVS voice mail system can be done from any phone.

  1. Dial the TVS pilot number (extension 107 or 115)
  2. When the voice mail system answers press "#" + "6" + "STAR"
  3. Log into the message manager's mailbox (999)
  4. Press "6" for other features
  5. Press "3" to set the time & date
  6. Press "1" to change the current time (press "0" for help)
  7. Enter the hour then press "#" or enter the hour and minutes then press "#"
  8. Press "1" for AM or "2" for PM
  9. Press "2" to accept the new time
Top of Page

PCS Digital

Set date and time through the display:
  1. Press "Feat" "#" "0".
  2. At the "CHK PSWD:_ prompt, Enter "0000" (Default Password).
  3. From the soft menu, press "SAVE".
  4. Select "TIME" and press "SHOW".
  5. Press "CHG" and enter the "YEAR" and press "SAVE" then "NEXT".
  6. Press "CHG" until the correct month appears, then press "NEXT".
  7. Press "CHG" and enter the correct day, press "SAVE" and then "NEXT".
  8. Press "CHG" until the correct weekday is selected and then press "NEXT".
  9. Press "CHG" and enter the correct hour, press "SAVE" and then "NEXT".
Set date and time through the phone:
  1. Press "24"
  2. Wait to hear the Auto Attendant Greeting
  3. Press "#".
  4. Press "#" "0".
  5. Enter the password (default is 9#56).
  6. Press "4" for "Date & Time".
  7. Press "1" to review date.
  8. Press 2 to change date and time
  9. Enter time in 24 hour (military) format.
  10. Enter the date MM:DD:YY
Top of Page

Samsung Prostar 816 System

Changing the time on a Samsung Prostar 816 system can be done from any display phone with the handset on-hook. (Do not lift handset off hook while programming.

  1. Enable technician programming mode
    • Press "#" - "PROGRAMMING" is displayed
    • Dial "20" - "MMC ENABLED" or "MMC DISABLED" is displayed
    • Dial the password (default - 1234) - if wrong password is enter "ERROR" is displayed
    • Dial "1" to enter program mode
    • Press "#"
  2. Press "#" key - "PROGRAMMING" is displayed
  3. Dial "55" - the display shows "YY MM DD W HH MM" and then the current date is displayed
  4. Enter the new date
    • YY = Last two digits of the year
    • MM = Month (01 - 12)
    • DD = Day of the month (01 - 31)
    • W = Day of the week (1 -7 day of the week begins on Monday & ends on Sunday)
    • HH = Hour (Use 24 hour clock)
    • MM = Minutes (0-59)
  5. Press "#" - new date is saved
Top of Page

Toshiba CTX 100 Phone System

Any display phone can be used to change the time on Toshiba CTX 100 system. Do not lift the handset.

Enter programming mode:
  1. Press "Hold"
  2. Press * # * # 1 * 2 * 3 *
  3. Display shows "Password ="
  4. Enter 0 0 0 0 (or applicable system programming password)
  5. Press "Hold"
  6. Display shows "Prog ="
  7. Enter 9 0 2
  8. Press "Hold"
  9. Display shows "Select Param"
Change the date:
  1. Press "Intercom" button
  2. Enter yymmdd where yy = year, mm = month, dd = day
  3. Press "Hold"
  4. Press "Hold" (again)
  5. List handset and hang up again
Change the time:
  1. Press "Line 1" button (should be button directly above intercom button)
  2. Enter hhmmss where hh = hours, mm = minutes, ss = seconds (military time)
  3. Press "Hold"
  4. Press "Hold" (again)
  5. List handset and hang up again
Top of Page

Toshiba Strata DK Telephone System

Changing the time on a Strata DK system must be done from the "main" or primary phone. It is usually extension # 10, or # 200.

  1. With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply)
  2. Enter the correct time using HH/MM/SS, like 07:24:00
  3. Press redial
Top of Page

Toshiba DK 280

Date
  1. From receptionist station, without lifting the handset, press "Intercom"
  2. Dial "#651"
  3. Dial the time in YY:MM:DD format.
  4. Press "Redial" or "#".
  5. Press speaker.
Time
  1. From receptionist station, without lifting the handset, press "Intercom"
  2. Dial "#652"
  3. Dial the time in military format HH:MM:SS.
  4. Press "Redial" or "#".
  5. Press speaker.
Day of the Week
  1. From receptionist station, without lifting the handset, press "Intercom"
  2. Dial "#653"
  3. Dial the day of the week (1-7).
  4. Press "Redial" or "#".
  5. Press speaker.
Top of Page

Toshiba Perception

From attendant station
Follow all steps even if you wish to change only the time on your system.
  1. Display Date:
  2. Press the "DIS TOD" key.
  3. The date is now displayed as follows:
      SRC     cos DEST
      Month Day Year

Set Date:
Enter the date on the dial pad in MMDDYY format. The new date is displayed.
  1. Display Time:
  2. Press the "DIS TOD" key again.
  3. The time is now displayed as follows:
      SRC       cos       DEST
      Hours Minutes Seconds

Set Time:
  1. Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
  2. To Start the Clock and Clear Display:
    Press the "DIS TOD" key a third time.
Top of Page

Vodavi Starplus 616, 1224, 2448, and 96EX 

 

 

 

 

 

 

 

 

 

 

 

 From the First Attendant Station:

    1.  Press ON/OFF Button
    2.  Dial 76 on the dial pad 
    3.  Enter date and time as follows: YY MM DD HH MM 
    4.  YY = Year (00-99) 
    5.  MM = Month (01-12) 
    6.  DD = Day (01-31)
    7.  HH = Hour (00-23)
    8.  MM = Minute (00-59)
    9.  Press HOLD

Top of Page

 

Vodavi Starplus-Tria, Digital, Mach I, Infinity, DVX and XTS

 

From the First Attendant Station:

    1.  The first attendant station may set system time and date.
    2.  Dial [692]
    3.  Enter date and time as follows: YY MM DD HH MM 
    4.  YY = Year (00-99)
    5.  MM = Month (01-12)
    6.  DD = Day (01-31)
    7.  HH = Hour (00-23)
    8.  MM = Minute (00-59)
    9.  When the correct number of digits are entered, a confirmation tone sounds.

Top of Page

 

Vodavi Starplus STS System

 

System Time/Date must be set by the first programmed Attendant via admin programming or using feature code 692.

To set using the feature code:

    1.  Dial [692] on the dial pad. A confirmation tone will sound.
    2.  Enter date and time as follows: YYMMDDHHMM
    3.  YY = Year (00-99)
    4.  MM = Month (01-12)
    5.  DD = Day (01-31)
    6.  HH = Hour (00-23) 
    7.  MM = Minute (00-59)
    8.  When the correct number of digits are entered, a confirmation tone will sound. 
    9.  Press the ON/OFF button to OFF to update the display.

Top of Page

Vodavi Infinity

From any 24-button display phone:

    1.  Enter programming mode by dialing **3226 from any 24-button display phone.
    2.  Press FLASH and dial 11
    3.  The display should show:
         DATE & TIME
         MM/DD/YY        HH:MM am
    4.  Choose display format by pressing the appropriate button in the flexible button field. 
    5.  Press the HOLD button or dial in the time and date as follows (12 digits): YY MM DD HH MM SS
    6.  YY = Year (00-99)
    7.  YY = Year (00-99)   
    8.  MM = Month (01-12)
    9.  DD = Day (01-31)
  10.  HH = Hour (00-23)
  11.  MM = Minute (00-59) 
  12.  Press HOLD to save. A confirmation tone plays and the display updates.

Top of Page


         

Terms Of Use | Privacy Statement
Copyright 2010 by Teledata Interconnect, Inc.

DNN Skins created with Artisteer.